PROGRESS P550038 2-LT OUTDOOR FLUSH MOUNT SIGHTING" PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Frame 1 C | Screw 2 D | Side glass panel 4 E | Bottom glass panel 1 HARDWARE CONTENTS (not actual size) Nipple (1/81) Qty:1 n Wire Nut Qty:3 Mounting Strap (1/81P) Qty Hex Nut (1/8IP) Qty:1 & Lock washer Qty:1 © = Finial (1/81P) Qty THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing parts 938097591 Page:1 dD 800-447-0573
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. You now need to adjust the nipple length according to the fixture canopy depth. Lift up the fixture and pass the nipple (AA) through the center mounting hole in the fixture canopy. While holding the fixture with one hand, thread the nipple (AA) in or out of the mounting strap (CC) until 3/16" of threads are showing. That should be enough to mount the fixture as instructed in step 5.
Assembly Instructions 7. Install the bottom glass panel (E) 7 into the frame (B). oO Next install the four side glass panels (D) into the frame (B). ES 8. Attach the frame (B) to the fixture (A) using the two screws supplied (C) to secure tightly. WARRANTY AND EXCLUSIVE REMEDY: Progress products, when properly Installed and under normal conditions of use, are warranted to aur customers early ta be free from defects In materiel and workmanship at time of shipment.
