P500257-078 P500258-078 P500257-141 P500258-141 SIGHTING P500257-143 P500258-143 P500257-147 P500258-147 PACKAGE CONTENTS 4-LT PENDANT 6-LT PENDANT PART| DESCRIPTION QUANTITY A | Stem Socket Assembly !74‘ P500257 P500258 ATTACH YOUR RECEIPT HERE Purchase Date L,j f’J e HARDWARE CONTENTS (not actual size) |p|cfs| el || = Hex nut Wire | 1/8IP | Screw| Chain | Nipple |Chain |Canopy (Chain loop Thumb| Cross Cross Cross Cross | Knurled | nut [Mounting| collar | holder | (1/8IP)| (727} (1/8IP) | Screw Plate Plate
A Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3.Unfold the arms of the socket 3 assembly (C) to locations. And install stem (A) to the socket assembly (C). g s P500257 P500258 4. A. Pass the wires through the cross plate nut (PP) and chain loop B. Place the cross plate {MM) to the stem (A), then aligning the hole of the arms (B) to the hole of the cross plate (MM} and place cross plate (LL} to the stem, securing with thumb screw (KK). C. Secure knurled nut {PP}and chain loop {JJ} onto the stem (A). D.
Assembly Instructions 5. Weave wires through chain (GG). Pass wires and chain through screw collar {DD} and canopy {HH). Open two links of chain and attach one end to chain loop {1J) and the other end to the chain holder (EE). Close the chain links. Pass the wires through the chain holder/ threaded nipple/mounting strap. NOTE: During this step, you may choose to shorten the chain and electrical/ground wires. @ Screw collar Strip 33 ” of insulation from 7. Tuck the wires inch the 8.
