SPROG REDS LIGHTING" P500213 P500214 P500371 3-LT PENDANT 4-LT PENDANT 8-LT FOYER PACKAGE CONTENTS QUANTITY PART| DESCRIPTION P500213 | P500214 | P500371 A | Fixture Square Tube Top Frame Bottom Frame Body With Square Arm Stem Finial Candle Cover 3 4 P500213 P500214 P500371 HARDWARE CONTENTS (not actual size) Hex Nut Wire Nut | 1/8IP Mounting Plate | Screw Collar | Chain Holder | Nipple | Chain Loop | Chain | Canopy | Quick link (1/8IP) Qty:2 Qty:3 Qty:1 Qty:1 Qty:1 Qty:1 Qty:1 Qy1 | Ql | Quirky THANK YOU f
/I\ Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker pane! before beginning installation. CAUTION: Risk of fire. Min. 80°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
Assembly Instructions 93103629 Page:3 3. Pass the wires from fixture (A} through the stem (F) and body {E). Thread the stem (F) onto the fixture {A)Thread the bed (E} onto the stem {F). Secure all parts tightly together. Attach the top frame (C) and the square tubes (B) to the square arm (E) as shown on the diagram using four finials (G) to secure the parts tightly together. Then, attach the bottom frame (D) to the square tubes (B) using the last four finials (G) to secure the parts tightly together.
Assembly Instructions 5. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts {BB}, connect the RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire, Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box, 6. Tuck the wires into the junction box and slip the canopy {1} over the chain holder.
