PROGRESS SIGHTING P400291-31M P400292-31M 5-LT CHANDELIER 6-LT CHANDELIER PACKAGE CONTENTS QUANTITY TIPTOP PART| DESCRIPTION P400291 | P400292 A | Fixture Tube Chain loop P400291 P400292 FT HARDWARE CONTENTS (not actual size) Hex Nut Wire Nut | Mounting Strap| Screw Collar | Chain Holder | Nipple Chain Quick link Canopy Qty:2 atty Qty: Qty Qty Qty Qiy:1 Quay Qty: THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing parts Dd (@ 1-4 -Fri
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 80°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 | sey = J l P400291 P400292 3. Equally adjust the arms by carefully turning them out from the center. > . 4, Pass the wires through tube (B) and chain loop (C). Screw the tube (B) into fixture (A). Then screw the chain loop (C) into the tube (B), secure them tightly. NOTE: During this step, determine the hanging length of your fixture by removing chain links (GG) and optionally cutting the electrical and ground wire to length.
ASSEMBLY INSTRUCTIONS 6. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect the RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. 7. Tuck the wires into the outlet box and slip the canopy (JJ) over the chain holder.
