PROGRESS LIGHTING P400246-147 5-LT CHANDELIER W/GLASS PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Stem 1 C | Glass shade 5 HARDWARE CONTENTS (not actual size) &® Go| = |§1@ Hex nut | Wire nut| Mounting | Screw [Chain holder | Nipple | Chain | Chain loop | Nipple | 6” Pipe [12" Pipe | Quick | Canopy plate collar (1/8IP) | (1/81P)| (1/81P) | (1/8IP) | link Qty:2 Qty:3 Qty:1 Qty:1 Qty:1 Qty Qy1| Qty: Qty | Qty | Qty | Qty | Quirky © [ww 18 Missing parts? Please contact Customer Service at 1-8
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS 3 ee 5. Pass the wires through the stem (B), 6" pipe {KK}, four 12" pipes (HH}, nipple {1J), and chain loop (HH). Remove pipes to achieve overall desired length. Next, attach stem (B) onto fixture (A), attach pipe (KK) to stem (B) using nipple (JJ) to secure tightly. Weave wires through chain {GG). Pass wires and chain through screw collar (DD) and canopy (NN). Open one link of chain and attach to chain loop {HH), close the chain link.
ASSEMBLY INSTRUCTIONS 5 5. Tuck the wires into the junction box and slip the canopy (NN) over the chain holder. Thread the screw collar (DD) onto the chain holder to secure the canopy tightly to the ceiling. 6 6. Place glass shades (C) onto fixture glass holders (A). Screw lamp (not included) into fixture socket. Use 60-watt MAX incandescent candelabra base, HSBC or SLED.
