+PROGRESS LIGHTING” P3701 1-LT FOYER LANTERN PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Glass Shade 1 C | Glass Frame 1 HARDWARE CONTENTS (not actual size) Nipple | Chain | Quick Loop Canopy Hex Nut Wire Nut | Mounting Strap | Screw Collar | Chain Holder link Qty:2 MySQL Quirky Qly:1 Quirky Qty | Oty | Qiy:t Quirky Qty 93018802 Page: © THANK YOU for selecting Progress Lighting We can assist you with questions regarding product information, assembly or missing parts 800-447-0573 am-8pm (Ea
AN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
ASSEMBLY INSTRUCTIONS Attach glass shade (B) and glass frame (C) to the fixture NOTE: During this step, determine the hanging length of your fixture by removing chain links (GG) and optionally cutting the electrical and ground wire to length. Do NOT cut electrical or ground wires until this overall length is determined. Leave AT LEAST 6 inches MINIMUM of wire past the chain holder (EE) to allow for easy connections in step 6. (Chain links can be spread open with 2 pairs of pliers.
ASSEMBLY INSTRUCTIONS 5. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect the RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box. 6. Tuck the wires into the outlet box and slip the canopy (KK) over the chain holder.
