{PROGRESS LIGHTING P350203-031 3-LT SEMI-FLUSH CON PACKAGE CONTENTS PART| DESCRIPTION QUANTITY A | Fixture 1 B | Frame 1 C | Screw 3 D | Round Finial Seat ring Canopy 1 ! -OR®—cp= CET] o—1L Ceiling mounting 1 Hanging mounting HARDWARE CONTENTS (not actual size) Screw | Wire nut | Round Mounting Plate | Hex nut | Cylinder nut | Chain Chain loop | 12" Pipe 6" Pipe Nipple (#832) | | (Blinks) (U8P) | (PUBIS) | (1/8IF) | (1/8IP) Qty:2 Qty:3 Qty:1 Qty:2 Qty:2 Qty:1 Qty:2 Qty:4 Qty:1 Qty:4 Missing parts? Please co
/I\ safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
Ceiling Assembly Instructions 3 Erp Attach round arm (D) to frame {B) use screw (C) to secure tightly; then attach other end of round arm (D) to the steel plate of fixture (A) use finial (E) to secure tightly. 4, Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire.
Hanging Assembly Instructions Canopy Parts Remove existing canopy parts and canopy (G) from fixture(A). Install canopy parts and chain loopy) into canopy (G), Secure tightly. (66) Longhand @Jm x1 7. Pass the wires through the seat ring (F) / nipple pipe pipe (HH) to achieve overall desired length. Next attach seat ring {F) / pipe onto fixture (A) , secure tightly. Weave electric cord and ground wire through chain {FF) and chain loop (GG). Open two links of chain and attach both ends to chain loops {GG).
Hanging Assembly Instructions 9. Secure the fixture (A) to screws (AA) use the two cylinder nuts {EE) to secure tightly. Ee Cylinder nut VD) x2 10. Screw lamp {not included) into fixture socket. Use 60-watt MAX Incandescent medium base lamp, HSBC or SLED. WARRANTY AND EXCLUSIVE REMEDY: Progress products, when proper Installed and under normal conditions of uss, are warranted to our customers only to be free from defects In material and ‘workmanship at time of shipment.
