OGRESS LIGHTING P300170-009 PACKAGE CONTENTS 3-LT BATH PART| DESCRIPTION QUANTITY A | Fixture 1 B Glass Shade 3 C | Socket Ring 3 HARDWARE CONTENTS (not actual size) oe Screw Wire nut Round mounting plate Qty:2 Qly:3 Qty:1 Hex nut Qty:2 ® Cylinder nut Qty:2 Missing parts? Please contact Customer Service at 1-800-447-0573, OD am-8pm (Eastern), Monday Friday, or at 93109259 Page:1
JN Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and tum electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 80°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with N.
Assembly Instructions 3. Strip 3/8” of insulation from the electrical wire ends. Using wire nuts (BB), connect white fixture wire to the white supply wire from the outlet box; connect the black fixture wire to the black supply wire from the outlet box. Connect the fixture ground wire and supply ground wire 5 using a wire nut or by fastening to the ground screw on the round mounting plate. Push all wire connections up and into the outlet box. 5. Use socket cup {C} to secure the glass {B) to the fixture.
