Installation Guide

ManualsBrandsProgress Lighting ManualsCeiling Fan Light KitsSpringer II Collection Architectural Bronze Globe Rustic Light Kit

Table Of Contents

PACKAGE CONTENTS

HARDWARE CONTENTS (not actual size)

Missing parts? Please contact Customer Service at 1-800-447-0573 or

customerservice@progresslighting.com, 8am-8pm (Eastern), Monday - Friday

93165614 Page:1

PART

DESCRIPTION QUANTITY

A Light Kit 1

P260004

B Lamps

2-LT SPRINGER FAN LIGHT KIT

Qty:4

Screw

Qty:4

Cage Screw

Glass Shade

Summary of content (6 pages)

PAGE 1
P260004 2-LT SPRINGER FAN LIGHT KIT PACKAGE CONTENTS PART DESCRIPTION A B C QUANTITY Light Kit Lamps Glass Shade 1 2 1 AA A BB B C HARDWARE CONTENTS (not actual size) AA BB Screw Cage Screw Qty:4 Qty:4 Missing parts? Please contact Customer Service at 1-800-447-0573 or customerservice@progresslighting.
PAGE 2
! Safety Information Please read and understand this entire manual before attempting to assemble, operate or install the product. CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation. CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
PAGE 3
ASSEMBLY INSTRUCTIONS 2a. Loosen Screws (AA) and remove Light Kit Pan (F) from the light kit. 2 Install Light Kit 2a F AA Screws X4 AA 2b. Use the three fan screws removed in step 1b to attach the Light Kit Pan (F) to the fan. 2b FAN F FAN SCREWS 2c FAN FAN SCREWS F G J LIGHT KIT 93165614 Page:3 2c. Connect the Fan Wire Connector (G) to the Light Kit Wire Connector (J).
PAGE 4
ASSEMBLY INSTRUCTIONS 2d. Use Screws (AA) to attach the Light kit Housing (H) onto the Light Kit Pan (F). 2d FAN AA F Screws X4 AA LIGHT KIT H 2e. Screw Lamps (B) into the lamp sockets. Make sure the Lamps (B) do not exceed the maximum wattage specified on the fixture’s wattage rating label. 2e B 2f H 2f.Slide the GLASS SHADE (C) into the CAGE (I). Tighten the Cage SCREW (BB) until the CAGE (I) is secured to the Light kit Housing (H) .
PAGE 5
Instructions d'Assemblage et Installation MISE EN GARDE: Lire les instructions avec soin et couper le courant au disjoncteur central avant de commencer l'installation. MISE EN GARDE: Lire les instructions avec soin et couper le courant au disjoncteur central avant de commencer l'installation. MISE EN GARDE: Risque d'incendie. Min 90°C conducteurs d'alimentation. Consulter un électricien qualifié pour assurer le bon conducteur de circuit de dérivation.
PAGE 6
REVISION TRACKING HISTORY REV A DESCRIPTION RELEASE FOR PRODUCTION DATE INIT.