Instructions / Assembly

Unpack your fan and check the contents. You should have the following items:
1.
2. Mounting plate (located inside canopy)
3. Canopy assembly
4. Ball/downrod assembly with safety cable
5. Coupling cover
Set of blades (5)
6. Fan motor assembly
7. Set of blades bracket (5)
8. Mounting plate
9. Switch housing
10. Balancing kit
IMPORTANT
PLEASE REMOVE RUBBER MOTOR
SUPPORT PLATE ON THE BOTTOM OF THE
FAN BEFORE INSTALLING BLADES OR
TESTING MOTOR
a b
c
3
1
2
6
8
7
9
10
11
4
5
d
Unpacking Your Fan 2.
11. Loose parts bag containing:
a. Blade attachment hardware
(16 screws, 16 rubber washers)
b. Blade bracket attachment hardware
(1 screws with lock washers)
c. Mounting hardware
(3 screws, 1 plastic gasket,
1 metal gasket)
d. Electrical hardware
(3 plastic wire connectors, 1 Pull chain)