Instructions / Assembly

Hanging the Fan
REMEMBER to turn off the power.
Follow the steps below to hang your fan
properly.
1. Attach the mounting plate to the outlet box
using the screws two screws and washers
provided with the outlet box.(Fig. 4). For
best performance be sure the mounting plate
is level and secured firmly against the
ceiling. You may need to insert additional
washers (not provided) between the outlet
box and mounting plate to make it level.
2. Carefully Lift the fan motor assembly
(without the blades) and insert the T section
of the motor housing plate into the slot in the
mounting plate as shown in Fig. 5.
You are now ready to make the electrical
connections.
4.
Figure 4
Figure 5
Outlet box
Mounting
plate
Screws
Outlet box
Solt
Fan
motor