Installation Guide

4.
Attaching the Fan Blades
REMEMBER to turn off the power. Follow the
steps below to hang your fan properly:
Step 1. Remove the metal washer and fan
housing from the fan motor by removing the six
screws from the rim of collar. (Fig. 5)
Step 2. Attach the blade holder to the blades
using the screws provided. Repeat process with
other blades. (Fig. 6)
Step 3. Fasten the blade assembly to the fan
motor using the blade screws supplied. Tighten
each screw and make sure the blade is straight.
(Fig. 7)
Step 4. Replace the metal washer and fan
housing to the fan motor by using the screws
previously removed. (Fig. 8)
Figure 5
Figure 6
Screws
Motor Housing
Metal Washer
Fan Motor
Screws
Blades
Blade Holder
Figure 8
Screws
Motor Housing
Metal Washer
Fan Motor
Figure 7
Screws
Blade
Assembly
Fan
Motor