Specifications

Figure 7
Screws
Decorative ring
Attaching the Decorative
Ring
1. Attach the decorative ring through the
bottom of the ywheel by aligning the
holes on the decorative ring with the
holes on the tab and install the screws.
(Figure 7)
2. Put the fan motor assembly inside the
ywheel, engage the fan motor assembly
with tabs onto the ywheel by turning
clockwise till the screw holes on the fan
motor assembly align with the holes on
the tab of ywheel.(Figure 8)
3. After aligning the holes on the ywheel
with the holes on the tab, install the
screws. (Figure 9)
4. Put the upper housing on to the fan motor
assembly, then install the screws. (Figure
10)
5. Make sure all the screws are rmly
tightened.
Figure 8
Motor
assembly
Flywheel
Figure 9
Flywheel
Screws
Figure 10
Upper housing
Screws
5.