Specifications

4.
Attaching the Fan Blades
1. Attach the blades to the ywheel by
aligning the notches on the blades with
alignment post on the ywheel and put
the blade on to the ywheel. Secure with
screws but do not tighten. (Figure 5)
2. Repeat these steps for remaining blades.
3. Put the ywheel upside as shown (Fig.
6). Attach the nial to the bottom of the
ywheel aligning the screw holes of the
nial with the holes of the blade, secure
with screws and tighten. (Figure 6)
4. Securely tighten the screws mentioned is
step 1.
Blade
Screws
Flywheel
Figure 5
Figure 6
Screws
Finial