Specifications

4.
Attaching the Fan
Blades
Figure 5
Screw
Motor Assembly
Screw
Screw
1. Remove the three screws from the top
of fan motor assembly , then take off
the top housing (Figure 5)
2. Attach the blades to the fan motor
assembly by aligning the notches
on the blades with alignment post
on the ywheel and put the blade on
to the ywheel, secure with screws
and tighten it. Repeat these steps for
remaining blades. (Figure 6)
3. Put the top housing onto the fan
motor assembly secure with the
screws and tighten it .(Figure 7)
4. Make sure all the screws are rmly
tightened.
Screws
Motor Assembly
Blade
Figure 6
Figure 7
Screw
Motor Assembly
Blade
Screw
Screw