Installation Guide

1
2
3
4
5
6
7
8
a. Blade attachment hardware
(13 screws)
b. Mounting hardware
(1 blade bracket screw)
c. Electrical hardware & Balancing kit
(3 plastic wire nut connectors, 1 pull
chain and blade balancing kit)
d. Mounting hardware
(1 rubber gasket)
5. Fan Motor Assembly
6. Blade
Arms (4)
7. Blades (4)
8. Switch Housing
1. Mounting Bracket (inside canopy)
2. 6” Ball/Downrod Assembly (hanger pin
and locking pin pre-attached)
3. Canopy with Canopy Ring (attached)
4. Decorative Motor Collar Cover
2. Unpacking Y
our Fan
Unpack your fan and check the contents. Y
ou should have the following items:
a
b
c d