Specifications

4.
Attaching the Fan Blades
1. Put the fan upside -down as shown.
Attach the blades to the fan motor
assembly by aligning the notches on
the blades with alignment post on the
ywheel and put the blade on to the
ywheel , secure with screws and tighten
it.
2. Repeat these steps for remaining blades.
(Figure 5)
3. Flip the fan upside as shown .Tighten the
blades to the ywheel by installing the
screws to the side of ywheel.
4. Make sure all the screws are rmly
tightened. (Figure 6)
Figure 5
Figure 6
Figure 7
Motor Assembly
Screws
Decorative
Ring
Attaching the Decorative
Ring
1. Remove the three screws from the tab of
fan-motor assembly. Attach the decorative
ring to the fan -motor assembly by
aligning the holes on decorative ring
with the holes on the tab, and install the
screws.
2. Make sure all the screws are rmly
tightened.
Screws
Blade
Motor Assembly
Motor Assembly
Screws
Blade