Installation Sheet
Table Of Contents
- PLO182-P250002-E-Cover
- PLO182-P250002-Warranty
- PLO182-P250002-E-P0
- PLO182-P250002-E-P1
- PLO182-P250002-E-P2
- PLO182-P250002-E-P3
- PLO182-P250002-E-P4
- PLO182-P250002-E-P5
- PLO182-P250002-E-P6
- PLO182-P250002-E-P7
- PLO182-P250002-E-P8
- PLO182-P250002-E-P9
- PLO182-P250002-E-P10
- PLO182-P250002-E-P11
- PLO182-P250002-E-P12
- PLO182-P250002-E-P13
- PLO182-P250002-E-P14
- PLO182-P250002-E-P15
8.
Installing the Mounting
Plate
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws. (Do
not remove)
Step 2. Place the key holes on the mounting plate
over the 2 screws previously loosened from the
mounting ring, turn mounting plate until it locks in
place at the narrow section of the key holes.
Secure by tightening the 2 screws previously
loosened and the one previously removed. (Fig.
12)
Figure 12
Mounting
plate
Mounting ring
Screws