Operation Manual

Appendix B Electromagnetic Compatibility

(EMC)

B.1 PRORAD FPD

This equipment has been tested and found to comply with the limits for medical devices to the IEC

60601-1-2:2014/EN 60601-1-2:2015.

These limits are designed to provide reasonable protection against harmful interference in a typical

medical installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to other devices in the

vicinity.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to other devices, which can be determined by

tuning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving device.

- Increase the separation between the equipment.

- Connect the equipment into an outlet on a circuit different from that to which the other

device(s) are connected.

If the problem cannot be solved with the above measures, stop using this equipment and consult

the manufacturer, our official dealer or Prognosys Representative for help.

_________________________________________________________________________________