Operation Manual

73
© Prognosys Medical Systems Private Limited│ X-Ray Products
Chapter 6 Troubleshooting
- In case of smoke, fire, abnormal high temperature, remove battery and power supply and turn
off detector immediately.
- In case of yellow error LED on, it may trigger the impact. Please read the manual to release the
status and restart the power; if the yellow light cannot be removed, contact Prognosys service
engineer or local representative
- In case of abnormal image, calibrate detector by standard method. Contact Prognosys service
engineer or local representative if error is not removed by calibration.
- Other technical issue, contact Prognosys service engineer or local representative.
- When PRORAD cannot be turned on, please check if the battery has power or if the DC power
supply is connected.
- When the software shows that the network can't connect, please confirm the signal of
PRORAD first. If it is wireless network, the third light needs to be solid green to indicate that it
has been connected. If the green light flashes, it means that PRORAD is not connected. At this
time, please check the network settings of the environment and the computer, and have
successfully connected.