Operation Manual

product such as power supply, installation environment, etc. contained in this manual.

Prognosys Medical Systems Private Limited. shall not be liable for malfunctions and damages

resulting from natural disasters such as fires, earthquakes, floods, lightning, etc.

_________________________________________________________________________________

1.1 Product Introduction

PRORAD X-Ray Flat Panel Detector is an X-ray image acquisition device that is based on flat-panel.

This device should be integrated with an operating PC and an X-ray generator. It can do to utilize as

digitalizing X-ray images and transfer for radiography diagnostic. Each X ray photon will be

converted to electronic signal by scintillator and the sensor array. Electronic signal in the pixel will

be readout by driver IC and then become an image before send to PC.

1.2 Product Series

Model

Description

PRORAD V14 CLARITY

Glass version 14”x 17” FPD with CsI

PRORAD V14 HC

Glass version 14”x 17” FPD with GOS

PRORAD V17 CLARITY

Glass version 17”x 17” FPD with CsI

PRORAD V17 HC

Glass version 17”x 17” FPD with GOS

1.3 Product Intended Use

The Wireless(V14 CLARITY, V14 HC, V17 CLARITY, V17 HC)/Wired(V14 CLARITY, V14 HC, V17 CLARITY,

V17 HC, V17 HCe) PRORAD X-Ray Flat Panel Detector with PRORAD CS is intended to capture for

display radiographic images of human anatomy. It is intended for use in general projection

radiographic applications wherever conventional film/screen or CR systems may be used. The

PRORAD X-Ray Flat Panel Detector with PRORAD CS is not intended for mammography, fluoroscopy,

tomography, and angiography applications. The use of this product is not recommended for pregnant

women and the risk of radioactivity must be evaluated by a physician.