Operation Manual

Chapter 1 Introduction

This manual is intended to provide the operator with an overview of the operation and safety

requirements for the PRORAD X-Ray Flat Panel Detector. This manual is not intended to provide

instructions on actual treatment procedures and it is expected that users should have official

radiologist or any other practitioners license prior to using the device. The Manufacturer and

Distribution organization assume no liability through the use of the device.

All care has been taken in the preparation and checking of this manual however there is no

guarantee provided that all information is correct. The information provided in this manual is

subject to change without notice.

Only CE or FDA approved or authorized accessories may be used in this device. The Manufacturer

and Distribution organization shall not be held liable or responsible for damages or injury caused as

a result of using non-approved accessories. Installation may only be conducted by authorized

service personal. Some maintenance and service work also must be carried out by authorized

service agents and only those procedures outlined in the operator and service manual are allowed.

Any service work carried out by unauthorized person will void all warranties. No circuit diagrams or

component part lists are to be provided for this device. If you require technical documentation that

is not provided in this manual then please contact the manufacturer or your local distributor in

writing with your reasons for wanting them and then a copy of the service manual may be provided.

Before using the PRORAD X-Ray Flat Panel Detector, the operator should read this manual carefully

and pay particular attention to the sections of Safety, Operation and Maintenance.

_________________________________________________________________________________

Caution

Prognosys Medical Systems Private Limited. shall not be liable for malfunctions and damages

resulting from use under environment conditions outside the range of using conditions for this