Operation Manual

46
© Prognosys Medical Systems Private Limited│ X-Ray Products
Chapter 4 Basic Operation
4.1 Preparing the Flat Panel Detector
This section describes how to prepare the flat panel detector.
4.1.1 Type of Flat Panel Detector
PRORAD V14 CLARITY, PRORAD V14 HC, PRORAD V17 CLARITY, PRORAD V17 HC
4.1.2 Number of the Connectable Flat Panel Detector
Up to 5 panels can connect to system at the same time.
4.1.3 Connecting/Disconnecting the Flat Panel Detector
______________________________________________________________________________
Do not place the connector on floor.
Make sure that the latches on both sides are
properly engaged when connecting the
connector. If the connector is inserted
incompletely, the power may turn off.