Operation Manual
26
© Prognosys Medical Systems Private Limited│ X-Ray Products
battery of a different capacity, type and/or brand. Otherwise, the battery pack may be overcharged
during charging, and abnormal chemical reactions may occur inside the battery pack, causing it to
overheat, emit smoke, explode or ignite.
Do not put the battery pack in a microwave oven or high-pressure container. Otherwise, the
battery pack may be rapidly heated or damaged, causing it to overheat, emit smoke, explode or
ignite.
If the battery pack leaks or emits an unusual odor, remove it from fire immediately. Otherwise, the
leaked electrolyte may catch fire, causing the battery pack to overheat, emit smoke, explode or
ignite.
If you notice an unusual odor, heat, discoloration, deformation or any other abnormality during use,
charging or storage, remove the battery pack from the equipment or battery charger, and stop
using it. Otherwise, the battery pack may overheat, emit smoke, exploder ignite.
Do not use the battery pack exposed to a strong magnetic field of an MRI system, etc.
Do not use the battery pack immersed in liquid.
Keep the battery away from fire. Avoid the action of short circuit. Never attempt to disassemble the
battery pack.
Use the designated chargers to charge the battery pack. Risk of explosion if battery replaced by an
incorrect type.
Dispose of used batteries according to the instructions.
When using the FPD for the first time, because the internal battery may be empty, do not install the
main battery, but use the wire to charge the FPD internal battery, and charge it for at least 15
minutes before it can be used normally.