Operation Manual

Do not charge the battery pack near fire or under strong sunshine. If the built-in protection

mechanisms are activated by a high temperature, the battery pack cannot be charged. Also, if the

built-in protection mechanisms are damaged, the battery pack may be charged with extremely high

current and voltage, and abnormal chemical reactions may occur inside the battery pack, causing it

to overheat, emit smoke, explode or ignite.

To charge the battery pack, be sure to use the designated battery charger and to observe the

charging conditions specified by Prognosys Medical Systems Private Limited.. If the battery pack is

charged in other conditions (temperature or voltage/current higher than specified, remodeled

battery charger, etc.), the battery pack may be overcharged or charged with extremely high current,

and abnormal chemical reactions may occur inside the battery pack, causing it to overheat, emit

smoke, explode or ignite.

Immediately stop charging the battery pack, if charging is not completed within the specified time.

Otherwise, the battery pack may overheat, emit smoke, explode or ignite.

Do not use the flat panel detector near the power cable.

Do not use a faulty or broken battery charger or AC adapter.

Do not over-charge battery (temperature higher than 60℃), it may burned patient.

_________________________________________________________________________________

2.13 Battery Pack Instructions

_________________________________________________________________________________

Warning

Battery pack requires regular checkup and replacement. Battery capacity begins to warm after a

period of time.