Operation Manual

19
© Prognosys Medical Systems Private Limited│ X-Ray Products
Warning
Make sure to use the optional parts, accessories and networks recommended by us. Failure to use
the optional parts, accessories and networks recommended by us may result in damage to the
equipment and/or electric shock and injury.
Connect to the Ethernet Network of 100BASE-TX or 10BASE-T prescribed in the IEEE standard 802.3.
Do not connect telephone lines to LAN connector. Only UTP-type straight LAN cables of 4-pair
Category 5 cable (CAT 5E) or higher are appropriate for connection to this connector. Compliant
with FCC part15.
_________________________________________________________________________________
2.9 System Isolation Instructions
_________________________________________________________________________________
Warning
To ensure complete system isolation, never install any unauthorized accessories or other such
items.
When it is necessary to install authorized accessories or optional items, contact our official dealer
or Prognosys Representative.
Keep equipment other than those used for patients out of their reach to ensure appropriate system
isolation.
In normal use, have a patient take a proper positioning for exposure. The operator should operate
the system in a place where safety from radiation is ensured. The operator should also make sure
before exposure that no one but the patient is in the exposure area and the operating area of the
system.