Users Manual Part 2

45
%'')7743-28(%8%86%27*)6
PROBLEM CAUSE SOLUTION
Barcode data is not transferred. Scanner is not connected to the Access
Point.
 Scan the pairing barcode on the
Access Point.
Scanner is out of range of the Access
Point.
QE\MQYQVERKIMW JXQ
 Bring Scanner closer to Access Point.
Access Point is defective.
Access Point must be replaced.
 More detailed information can be
found at proglove.com/support.
Scanner is defective.
Scanner must be replaced.
 More detailed information can be
found at
proglove.com/support.
Different barcode data is
transferred.
The keyboard layout of the end device is
set with a different language.
 Adjust the keyboard layout of the
GSRƼKYVEXMSRXSSPXSXLIOI]FSEVHPE]SYX
SJXLIIRHHIZMGI-RXLIGSRƼKYVEXMSR
tool
GSRƼKTVSKPSZIHI under “Device
settings - USB keyboard layout,” adjust
the language.
868
(915)
MHz