Users Manual Part 1

24
1. Position Scanner on the
fastening rail of the wearable.
The pins face down.
2. Push scanner down. A clear
GPMGOMRKWSYRHGSRƼVQWXLI
correct fastening.
3. Press the textile trigger on
the glove for about 2 seconds.
RESULT
Scanner lights up with all LEDs. You can hear a beeping
sound and feel a short vibration.
Scanner is switched on.
NOTE
Scanner switches off automatically after 15 minutes
without being used.
CONNECT VIA CONNECTIVITY DEVICE
1. Press the textile trigger on the
wearable in order to activate the
red crosshairs.
2. Aim scanner crosshairs on the
connectivity device and scan the
pairing barcode on the Access
Point or Gateway.
RESULT
Scanner lights up twice. You can hear a beeping sound and
feel a short vibration.
Scanner is connected to the connectivity device.
3
RD
78)47;-8',328,)7'%22)6 4
TH
STEP: CONNECT THE SCANNER
4
TH
STEP: CONNECT SCANNER (BLE)
CONNECT VIA PG INSIGHT MOBILE:
 *SVYWMRK1%6/(MWTPE]SV1%6/1%6/&EWMG
[MXL4+-RWMKLX1SFMPIZME7SJX[EVI/I]FSEVH-RXIRXSV
7(/ƼRHQSVIMRJSVQEXMSRYRHIV
proglove.com/support"PG Insight Mobile.
C
ONNECT VIA CONN
E
4
TH
STEP
:
CONNE