Users Manual Part 1

22
CAUTION
Only use scanner in a dry Charging Station and only
touch with dry hands!
This may otherwise lead to the Charging Station not
functioning properly.
 The pins face down.
-RWIVXWGERRIVMRXLI
Charging Station.
RESULT
Scanner pulses red and charges in the Charging
Station.
NOTE
The LEDs pulse red while in charging mode. When
XLIFEXXIV]MWJYPP]GLEVKIHXLI0)(WTYPWIKVIIR-X
takes about 2 hours to charge a scanner.
CAUTION
Only touch the connectivity device with dry hands!
This may otherwise lead to the connectivity device not
functioning properly.
NOTE
The following steps are only needed when connecting via
Access Point or Gateway.
CONNECTION WITH USB CABLE IN USB HID MODE:
1. Connect the USB cable with the
end device.
2. Plug the other end of the USB
cable into the RJ50 socket of the
Access Point.
%GPIEVGPMGOMRKWSYRHGSRƼVQW
the correct fastening.
.
APPLICATION OF PROGLOVE SYSTEM
1
ST
STEP: CHARGE SCANNER 2
ND
STEP: CONNECT THE
'322)'8-:-8=():-')