Users Manual Part 1

17
10-SLOT CHARGING STATION
The 10-Slot Charging Station provides multiple options
XSQSYRXXSƽEXWYVJEGIW[SVOWXEXMSRWERHVEGOW8LI
charging status is indicated by the LEDs of the scanner.
The LEDs pulse red while in charging mode. When the
FEXXIV]MWJYPP]GLEVKIHXLI0)(WTYPWIKVIIRGSRWXERXP]-X
takes about 2 hours to charge a scanner.
13928-2+
CAUTION
Do not mount the 10-Slot Charging Station higher than 2m!
On the front and back side are different holes and recesses
to enable secure mounting of the 10-Slot Charging Station
(with screws and/or zip-ties).
Two wall mount slots on the back side can be used to
Ƽ\XLIHIZMGI[MXLWGVI[LIEHWQQETEVXJVSQIEGL
other.
The rail slot on the back enables mounting to a standard
(-2VEMPJEGMPMXEXMRKXLIMRWXEPPEXMSRMRER-8VEGOSVWMQMPEV
constructions. Additionally, the 10-Slot Charging Station
can be installed on a monitor arm or stand with holes
75mm appart horizontally and vertically.
MECHANICAL PROPERTIES:
Dimensions: ............................. 3.74 x 2.06 x 0.94 in
(298 x 203 x 25 mm)
Weight: ...................................... 2,2 kg
ELECTRONIC PROPERTIES:
Power supply: ........................... 24 VDC (1.67A)
via power supply
-28+)-4.
Use the provided power supply
only. Using any other type of AC
power supply is prohibited.
3:)6:-); 8)',2-'%0(%8%