User's Manual

39
CHARGING STATION S
PROBLEM CAUSE SOLUTION
MARK 2 does not charge in
Charging Station S.
MARK 2 is not correctly inserted in
Charging Station S.
 Insert MARK 2 in the Charging
Station S again.
Charging Station S is not connect-
ed to power source.
 Connect Charging Station S to
power source.
MARK 2 is defective.
MARK 2 must be replaced.
 More detailed information can be
found at proglove.com/support.
Charging Station S is defective.
The Charging Station S must be
replaced.
 More detailed information can be
found at proglove.com/support.
LEDs of MARK 2 do not light up im-
mediately when MARK 2 is placed
in the Charging Station S.
MARK 2 charges in the Charging
Station S, but the feedback signals
are delayed by about 30 seconds.
 Wait until the LEDs of MARK 2
signal the charging.