User's Manual

35
MARK 2
PROBLEM CAUSE SOLUTION
MARK 2 is not responding. Battery is not charged.
 Charge MARK 2 in the Charging Station S
for at least 20 min.
Glove is defective.
 Change glove.
MARK 2 is not vibrating or does not
beep after successful data transfer.
Feedback signals are disabled.
 Check whether the feedback signals in the
 are


red.
The battery charge is low.
 Charge MARK 2 in the Charging Station S
for at least 20 min.
TROUBLESHOOTING