User's Manual
30
cong.proglove.de can be
used to individually setup the MARK 2 system and improve
scanning processes.
1
ST
STEP: BARCODE SETTINGS
The barcode settings can be used to switch the barcode
types (including inverse barcodes) on or off and to set bar-
code lengths, edge tolerances as well as check digits.
APPLICATION EXAMPLE:
Avoid incorrect scans with different barcode types on one
label.
Switch off unused barcode types.
2
ND
STEP: DATA FORMATTING - PREFIX
AND SUFFIX
APPLICATION EXAMPLE:
Identify different work stations.
3
RD
STEP: DATA FORMATTING -
ADVANCED FORMATTING
Advanced formatting can be used to change barcode data
through rules with conditions and actions. These are then
in an IF-THEN relationship with each other, which means
that:
IF
THEN an action occurs.
An action is also carried out without a condition. 4 condi-
tions and 4 actions are possible per rule. Overall, up to 16
APPLICATION EXAMPLE:
Create the condition "Code types: Include code types:
CONFIGURATION TOOL