User's Manual

19
4
TH
STEP: CONNECT MARK 2 (868/915 MHZ)
CONNECT VIA BLE HID:
MARK 2 can be used to establish a connection via
Bluetooth Low Energy Human Interface Device (BLE HID)
to an end device.
Possible operating systems are: Apple iOS,
Google Android, Microsoft Windows.
The individual steps for connecting to the respective

following. More detailed information about using MARK 2 sys-

support.proglove.com.
PREREQUISITES:
 the end device supports at least Bluetooth 4.0 stan-
dard
 no interference or physical obstacles (e.g. metal
shelves) interfere with the connection between MARK 2
and the end device
 the range between MARK 2 and the end device is
< 10 meters
TIP
Visually label the connected devices
(MARK 2 with the end
device) , e.g. using numbering or a color code. This will

TIP
Adhere the pairing barcode to the end device. In this way, the

On a battery-operated end device, the power-saving mode
can lock the end device and MARK 2 simultaneously.
 Permanently disable the power-saving mode of the
end device.
The last 5 digits of the serial number attached to the
back side identify MARK 2 among the available Bluetooth
devices.
 Read the serial number of MARK 2.
RESULT

To make MARK 2 visible for the end device, the
MARK 2 must be put into pairing mode.

glove in order to activate the
red crosshairs.
2nd Aim MARK 2
crosshairs at the pair-
ing barcode and scan.
RESULT
MARK 2 pulses blue and beeping sounds can be heard.
MARK 2 searches for an end device in pairing mode.
4
TH
STEP: CONNECT MARK 2 (BLE HID)