User's Manual

CHARGING STATION
PROBLEM CAUSE SOLUTION
Scanner does not charge in Charging
Station.
Scanner is not correctly inserted in
Charging Station.
Insert scanner in the
Charging Station again.
Charging Station is not connected
to power source.
Connect Charging Station to power
source.
Scanner is defective. Scanner must be replaced.
More detailed information can be
found at
proglove.com/support
.
Charging Station is defective. The Charging Station must be
replaced.
More detailed information can be
found at
proglove.com/support
.
TIP 1
Problem could not be solved?
Insert scanner into the wearable. Press the
trigger on the wearable for about 15 seconds
and restart scanner.
TIP 2
Problem could not be solved?
Scan with scanner the Factory Default Barcodes:
SCANNER GATEWAY
Factory Default Barcode will reset all configurations!