User's Manual

PROBLEM CAUSE SOLUTION
What lights up? But no barcodes
are scanned.
The barcode label cannot be read.
Create new barcode label.
The barcode type cannot be read.
Check whether the barcode type in the
configuration tool is enabled under
“Symbology settings”.
The barcode length cannot be read.
Check whether the barcode length in the
configuration tool is enabled under
“Symbology settings”.
Scanner glass is dirty.
Clean the scanner glass with a cotton
swab.
What lights up? The barcode label is difficult to read.
To enhance the scanning performance,
make the following settings in the
configuration tool under “Symbology
settings”.
Fuzzy 1D processing: ON
Scanner glass is dirty.
Clean the scanner glass with a cotton
swab.
Scanning distance is not optimally
used.
Position scanner closer or further away
from the barcode label and scan.
4-28 in (10 - 70 cm)
SCANNER