User's Manual

4
TH
STEP: DEVICE SETTINGS
The Device Settings can be used to optimize the scanner
for certain use cases.
The Engine Settings allow to improve the readability of
barcodes:
activate Fuzzy 1D processing for hard to read 1D
barcodes
activate Display mode for barcodes on screens or foils
activate Picklist mode to enable a more accurate
aiming with the scanning field
The Feedback profiles allow to customize the scanners
feedback.
The Sleep Mode determines the duration of inactivity
after which the scanner turns off.
5
TH
STEP: SYMBOLOGY SETTINGS
The Symbology Settings can be used to switch the
barcode types
(including inverse barcodes)
on or off and to
set barcode lengths, edge tolerances as well as check
digits.
Switch off unused barcode types.
Switch on inverse barcode types if needed.
6
TH
STEP: WORKFLOW RULES
The Workflow Rules can be used to manipulate the
barcode data. These can be used to change barcode data
through rules with conditions and actions. These are then
in an IF-THEN relationship with each other, which means
that:
IF a condition is true, THEN an action is executed.
An action is also carried out without a condition.
APPLICATION EXAMPLE:
Insert the prefix “Pro” for the following barcode:
Condition: Barcode matches “Glove”
Action: Add Prefix “Pro”
Outcome: “ProGlove”