User's Manual

Under “Settings - Bluetooth,”
activate the Bluetooth option.
Select “LEO - 00000”.
01 02
LEO - 00000
On a battery-operated end device, the power-saving mode
can lock the end device and scanner simultaneously.
Permanently disable the power-saving mode of the end
device.
The last 5 digits of the serial number attached to the back
side identify the scanner among the available Bluetooth
devices.
Read the serial number of the scanner.
RESULT
Example serial number: LEO - 00000.
To make the scanner visible for the end device, the
scanner must be put into pairing mode:
1. Press the trigger on the
wearable in order to activate
the scanner.
2. Aim the scanner at the
pairing barcode and scan.
RESULT
Scanner pulses blue and beeping sounds can be heard.
Scanner is searching for an end device in pairing mode.
CONNECT WITH APPLE iOS 11 OR HIGHER: