User's Manual

4
TH
STEP: CONNECT THE SCANNER
4
TH
STEP: CONNECT SCANNER
(BLE)
CONNECT VIA PROGLOVE INSIGHT MOBILE:
For using a ProGlove scanner with ProGlove Insight Mobile
via software keyboard, Intent or SDK find more information
under docs.proglove.de> PG Insight Mobile.
CONNECT VIA CONNECTIVITY DEVICE
1. Press the trigger on the
wearable in order to activate the
scanner.
2. Aim scanner on the
connectivity device and scan
the pairing barcode on the
Gateway.
RESULT
Scanner lights up twice. You can hear a beeping sound
and feel a short vibration. Scanner is connected to the
connectivity device.
CONNECT VIA BLE HID TO AN END DEVICE
The scanner can be used to establish a connection via
Bluetooth Low Energy Human Interface Device
(BLE HID)
to
an end device.
Possible operating systems are: Apple iOS, Google
Android, Microsoft Windows.
The individual steps for connecting to the respective operating
systems for the first time can be found in the following.
PREREQUISITES:
The end device supports at least Bluetooth 4.0 standard
No interference or physical obstacles
(e.g. metal shelves)
interfere with the connection between the scanner and the
end device
The range between the scanner and the end device is
< 33 ft (10m)
TIP 1
Visually label the connected devices
(scanner with the end
device)
, e.g.using numbering or a color code. This will
allow the user to find the right devices faster.
TIP 2
Adhere the pairing barcode to the end device. In this way,
the user can find it quickly and easily.