User's Manual

10-SLOT CHARGING STATION
OVERVIEW TECHNICAL DATA
MOUNTING
MECHANICAL PROPERTIES:
Dimensions: 3.74 x 2.06 x 0.94 in
(298 x 203 x 25 mm)
Weight: 26.4 oz (750g)
ELECTRICAL PROPERTIES:
Power supply: 24 VDC (1.67A)
via power supply
INT: GE40I 24-P1J
Use the provided power supply only.
Using any other type of AC power
supply is prohibited.
The 10-Slot Charging Station provides multiple options
to mount to flat surfaces, workstations and racks. The
charging status is indicated by the LEDs of the scanner. The
LEDs pulse red while in charging mode. When the battery is
fully charged, the LEDs pulse green constantly.
Do not mount the 10-Slot Charging Station higher than 2m!
On the front and back side are different holes and recesses
to enable secure mounting of the 10-Slot Charging Station
(with screws and/or zip-ties).
Two wall mount slots on the back side can be used to fix
the device with screw heads 135mm apart from each other.
The rail slot on the back enables mounting to a standard
DIN rail, facilitating the installation in an IT rack or similar
constructions. Additionally, the 10-Slot Charging Station
can be installed on a monitor arm or stand with holes 75mm
appart horizontally and vertically.
CAUTION