Projector User's Guide

VOLTAGESELECTION (1)
You can choose between two voltage ranges, 90-130V,
60Hz or 180-260V, 50 Hz. The generator should be
switched off.Voltage selection is doneby pulling out
and turningthe plug-in board on the rear panelof the
generator.You can seethe correctmains voltage onthe
top of the card, USE ON …VOLTS ONLY. Make sure
you insert thecard STRAIGHT.
MAINS (AC) CONNECTION (2)
The generatoris designed forACconnection only. Itcan
be connected to the most common mainsvoltages:
90-130V, 60Hzor 180-260V, 50Hz. Before mains
connection make sure that the operatingvoltage key
card matches (plug-in board)the mains voltage.
When charging the mains voltage the modellinglamp
must also be changed.Connect the unit tothe mains
with the cable included in the delivery.
WARNING! Neveruse ordinaryhousehold extension
cords to extend the power cable. They may overheat.
Contact your Profotodistribution for proper equipment.
CHARGING(3)
Beforecharging, check that the plug-in boardis showing
the correctvoltage.The charging time varies somewhat,
depending on the power you selected andthe mains
voltage.The chargingtime isshortestatthelowestpower
andhighestvoltage.You usethe switch marked ON to
start charging. The ComPact600 and 1200Wsare both
equipped with automatic protection(cutout) against
overheating, which switches off charging. When the
temperaturedrops, the cutout resets automatically.
This protects the unit against serious faults that could
otherwise result fromoverheating.
ComPact – English
Profoto 10 The Light Shaping Company
a
b
c
ComPact_Manual_nihav:Pro-7_Manual.final (?)_ny 06-12-05 09.06 Sida 10