User`s manual

12. Identify the Left and Right Handrail Covers (87,

8).

Slide the Left Handrail Cover (87) up against the

console assembly and tighten a #8 x 3/4" Screw

(4) into the bottom of the Left Handrail Cover. Be

careful not to overtighten the Screw.

Attach the Right Handrail Cover (8) in the

same way.

Console

Assembly

13 . Note: If it is assembled on a smooth surface,

the treadmill may roll forward during this

step.

Raise the Frame (56) to the upright position.

Have a second person hold the Frame until

step 16 is completed.

Orient the Latch Crossbar (97) as shown. Make

sure that the “This side toward belt” sticker

(B) is facing the treadmill. Attach the Latch

Crossbar to the brackets on the Frame (56) with

two 5/16" x 3/4" Screws (93).

Brackets