User's Manual

ASSEMBLY

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you nish all assembly steps.

• Left parts are marked “L” or “Left” and right parts

are marked “R” or “Right.”

• To identify small parts, see page 5.

In addition to the included tool(s), assembly

requires the following tools:

one Phillips screwdriver

one adjustable wrench

Assembly may be easier if you have a set of

wrenches. To avoid damaging parts, do not use

power tools.

1. To register your product and activate your

warranty in the UK, go to iconsupport.eu. If

you do not have internet access, call Customer

Service (see the front cover of this manual).

To register your product and activate your

warranty in Australia, email or post the follow-

ing information to the email address or postal

address on the front cover of this manual.

• your receipt (keep a copy)

• your full name, address, and telephone number

• the model number, serial number, and name

of your product (see the front cover of this

manual)

2. Set a sturdy piece of packing material under the

Front Frame (1).

Orient the Front Stabilizer (14) as indicated

by the sticker. Attach the Front Stabilizer to

the Front Frame (1) with two M10 x 68mm

Screws (67).

Then, remove the packing material.