User's Manual

26
HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
To select the settings mode, press the gear button.
The settings information will appear in the display.
2. Navigate the settings mode.
While the settings mode is selected, the matrix of
the display will display several optional screens.
Press the increase and decrease buttons next to
the Enter button repeatedly to select the desired
optional screen.
The lower section of the display will show instruc-
tions for the selected screen. Make sure to follow
the instructions shown in the lower part of the
display.
3. Change settings as desired.
Units—The currently selected unit of measurement
will appear in the display. To change the unit of
measurement, press the Enter button repeatedly.
To view distance in miles, select ENGLISH. To view
distance in kilometers, select METRIC.
Incline System Calibration—If the incline sys-
tem is not functioning properly, it may need to be
calibrated. To calibrate the incline system, press
the Quick Ramp increase or decrease button. The
ramp will move upward and downward as it cali-
brates. When the ramp stops moving, the incline
system is calibrated.
Contrast Level—The currently selected contrast
level will appear in the display. To adjust the con-
trast level, press the Quick Resistance increase
and decrease buttons.
Usage Information—The display will show the
total number of hours that the elliptical has been
used and the total distance (in miles or kilometers)
that has been pedaled on the elliptical.
4. Exit the settings mode.
Press the gear button to exit the settings mode.