proform.com Model No. PFEL51016.4 Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to proformservice.com. Or call 1-888-533-1333 Mon.–Fri. 6 a.m.–6 p.m. MT Sat. 8 a.m.–12 p.m. MT Please do not contact the store. CAUTION Read all precautions and instructions in this manual before using this equipment.
TABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 PART IDENTIFICATION CHART.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 1. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions. 10.
18. The elliptical does not have a freewheel; the pedals will continue to move until the flywheel stops. Reduce your pedaling speed in a controlled way. 20. Over exercising may result in serious injury or death. If you feel faint, if you become short of breath, or if you experience pain while exercising, stop immediately and cool down. 19. Keep your back straight while using the elliptical; do not arch your back.
STANDARD SERVICE PLANS all 5
BEFORE YOU BEGIN Thank you for selecting the revolutionary PROFORM® ENDURANCE 920 E elliptical. The ENDURANCE 920 E elliptical provides an impressive selection of features designed to make your workouts at home more effective and enjoyable. reading this manual, please see the front cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual.
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included.
ASSEMBLY • To hire an authorized service technician to assemble this product, call 1-800-445-2480. • In addition to the included tool(s), assembly requires the following tools: • Assembly requires two persons. one Phillips screwdriver • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. two adjustable wrenches • Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.
3. Press the Cover Mounts (106) on the underside of the Rear Stabilizer Cover (15) into the Rear Stabilizer (2). 3 15 106 2 4. With the help of a second person, place some of the packing materials (not shown) under the front of the Frame (1). Have the second person hold the Frame to prevent it from tipping while you complete this step. 4 6 Attach the Front Stabilizer (6) to the Frame (1) with two M10 x 122mm Screws (104) and two M10 Split Washers (105).
5. Tip: Avoid pinching the Main Wire (110). Avoid damaging the indicated plastic tabs (A). Have a second person hold the Upright (4) on the Frame (1). 5 Avoid pinching the Main Wire (110) and avoid damaging the tabs (A) Attach the Upright (4) with four M10 x 25mm Screws (99) and four M10 Split Washers (105); start all the Screws, and then tighten them. 4 99 105 99 1 105 A 110 6. Locate the wire tie (B) in the lower end of the Upright (4). Tie the wire tie to the Main Wire (110).
7. Using a plastic bag to keep your fingers clean, apply some of the included grease to the Pivot Axle (35). 7 Insert the Pivot Axle (35) through the Upright (4) and center it. Tip: It may be helpful to use a rubber mallet. 4 Next, slide a Pivot Spacer (54) onto the right side of the Pivot Axle (35). 82 Then, identify the Right Upper Body Leg (60), orient it as shown, and slide it onto the right side of the Pivot Axle (35).
9. Untie and discard the wire tie on the Main Wire (110). 9 7 While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Main Wire (110) and to the Sensor Wires (63). 63 Insert the excess wire into the Upright (4). 4 110 10. Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (101); start all the Screws, and then tighten them.
11. Orient the Right Pedal Arm (58) as shown, and then apply grease to the axle. 11 Attach the Right Pedal Arm (58) to the Right Roller Arm (59) with an M8 x 20mm Screw (126) and a Retainer (55); make sure that the flat side (D) of the Retainer is facing the Right Roller Arm. 44 Repeat this step for the Left Pedal Arm (44). 59 55 D 126 Grease 58 12. Apply a small amount of grease to one of the Pedal Arm Axles (64).
13. Orient the Rear Upright Cover (81) as shown, and attach it to the Upright (4) with four M4 x 16mm Screws (101); start all the Screws, and then tighten them. 13 117 Orient the Front Upright Cover (117) as shown and press it onto the Rear Upright Cover (81). 101 4 81 14. Identify the Right Arm Front Cover (65), orient it as shown, and attach it to the Right Upper Body Leg (60) with an M4 x 16mm Screw (101).
. Identify the Right Leg Inner Cover (83), orient it as shown, and attach it to the Right Upper Body Leg (60) with an M4 x 16mm Screw (101) and an M5 Washer (94). 15 Next, identify the Right Leg Outer Cover (69), orient it as shown, and press it onto the Right Leg Inner Cover (83). 60 Repeat this step on the other side of the elliptical. 83 94 16. Orient the Shield Cover Cap (118) and the Shield Cover (75) as shown.
17. Orient the Rear Console Cover (80) as shown and attach it to the Upright (4) with two M4 x 16mm Screws (101). 17 101 79 Next, orient the Front Console Cover (79) as shown and attach it to the Rear Console Cover (80) with two M4 x 16mm Screws (101). 101 101 4 80 18. Attach the Tablet Holder (127) to the Console (7) with four M4 x 16mm Machine Screws (111); start all the Machine Screws, and then tighten them. 18 7 127 111 19.
HOW TO USE THE ELLIPTICAL HOW TO PLUG IN THE POWER CORD A temporary adapter may be used to connect the power cord to a 2-pole receptacle as shown at the right if a properly grounded outlet is not available. This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. The power cord has a plug with a grounding pin.
HOW TO MOVE THE ELLIPTICAL HOW TO LEVEL THE ELLIPTICAL Due to the size and weight of the elliptical, moving it requires two persons. Stand in front of the elliptical, hold the upright (A), and place one foot against one of the wheels (B). Pull on the upright and have a second person lift the handle (C) until the elliptical will roll on the wheels. Carefully move the elliptical to the desired location, and then lower it to the floor.
HOW TO ADJUST THE POSITIONS OF THE PEDALS J Each pedal (G) can be adjusted to several positions. To adjust each pedal, simply pull the pedal handle (H) outward, move the pedal to the desired position, and then release the pedal handle into an adjustment hole beneath the pedal. Make sure to adjust both pedals to the same position. I G G H HOW TO EXERCISE ON THE ELLIPTICAL To dismount the elliptical, wait until the pedals (G) come to a complete stop.
CONSOLE DIAGRAM FEATURES OF THE CONSOLE When you use the manual mode of the console, you can change the resistance of the pedals and the incline of the ramp with the touch of a button. The advanced console offers an array of features designed to make your workouts more effective and enjoyable. While you exercise, the console will display continuous exercise feedback.
HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the elliptical has been exposed to cold temperatures, allow it to warm to room temperature before you turn on the power. If you do not do this, you may damage the console or other electrical components. The console features a tablet with a full-color touch screen. The following information will help you use the touch screen: Plug in the power cord (see HOW TO PLUG IN THE POWER CORD on page 17).
HOW TO SET UP THE CONSOLE 5. Check for firmware updates. Before you use the elliptical for the first time, set up the console. First, touch the profile button, touch Settings, touch Maintenance, and then touch Update. The console will check for firmware updates. For more information, see HOW TO CHANGE CONSOLE SETTINGS on page 28. 1. Connect to your wireless network. To use iFit workouts and to use several other features of the console, the console must be connected to a wireless network.
HOW TO USE THE MANUAL MODE 4. Follow your progress. 1. Touch the screen or press any button on the console to turn on the console. The console offers several display modes. The display mode that you select will determine which workout information is shown. See HOW TO TURN ON THE POWER on page 21. Note: It may take a few moments for the console to be ready for use. To select the desired display mode or to view statistics and charts, drag downward on the screen.
If there are sheets of plastic on the B metal contacts (B) on the handgrip heart rate monitor, remove the plastic. To measure your heart rate, hold the handgrip heart rate monitor with your palms resting against the contacts. Avoid moving your hands or gripping the contacts tightly. HOW TO USE A MAP WORKOUT OR AN ONBOARD WORKOUT 1. Touch the screen or press any button on the console to turn on the console. See HOW TO TURN ON THE POWER on page 21.
press a Quick Ramp button, you can then manually control the incline level (see step 3 on page 23). To return to the programmed resistance and/or incline settings of the workout, touch Follow Workout. When you select a workout, the screen will show an overview of the workout that includes details such as the duration and distance of the workout and the approximate number of calories you will burn during the workout. 4. Start the workout.
HOW TO CREATE A DRAW-YOUR-OWN-MAP WORKOUT If you make a mistake, touch Undo on the left side of the screen. 1. Touch the screen or press any button on the console to turn on the console. The screen will display the elevation and distance statistics for your workout. See HOW TO TURN ON THE POWER on page 21. Note: It may take a few moments for the console to be ready for use. 4. Save your workout. Touch Save New Workout to save your workout.
HOW TO USE AN IFIT WORKOUT 4. Select an iFit workout that you have previously added to your schedule on iFit.com. To use an iFit workout, the console must be connected to a wireless network (see HOW TO CONNECT TO A WIRELESS NETWORK on page 29). An iFit account is also required. IMPORTANT: Before iFit workouts will load, you must add them to your schedule on iFit.com (see step 1). 1. Add workouts to your schedule on iFit.com. To load an iFit workout from iFit.
HOW TO CHANGE CONSOLE SETTINGS 3. View the console tour presentation. IMPORTANT: Some of the settings and features described may not be enabled. Occasionally, a firmware update may cause your console to function slightly differently. To view a tour presentation that will guide you through the features of the console, touch How It Works. 1. Select the settings main menu. 4. Customize the unit of measurement and other settings. First, turn on the power (see HOW TO TURN ON THE POWER on page 21).
7. Calibrate the incline system. 3. Enable Wi-Fi. To calibrate the incline system, touch Maintenance, touch Calibrate Incline, and then touch Begin. The ramp will automatically rise to the maximum incline level, lower to the minimum incline level, and then return to the starting position. This will calibrate the incline system. When the incline system is calibrated, touch Finish. Make sure that Wi-Fi® is enabled. If it is not enabled, touch the Wi-Fi toggle to enable it. 4.
HOW TO USE THE SOUND SYSTEM THE OPTIONAL CHEST HEART RATE MONITOR To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE HOW TO ADJUST THE REED SWITCH Regular maintenance is important for optimal performance and to reduce wear. Inspect and properly tighten all parts each time the elliptical is used. Replace any worn parts immediately. If the console does not display correct feedback, the reed switch should be adjusted. To adjust the reed switch, first press the power switch to the off position and unplug the power cord.
See the lower drawing on page 32. Plug in the power cord, press the power switch to the reset position, and rock the Pulley (19) forward and backward just enough that the Magnet (43) passes the Reed Switch (38) repeatedly. See EXPLODED DRAWING C on page 39. Identify the Left and Right Shields (73, 74). Remove the M4 x 19mm Tek Screws (5), the M4 x 19mm Screws (127), and the M4 x 48mm Screw (107) from the Left and Right Shields; make sure to note the location of each size of Screw.
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone.
PART LIST Key No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 1 1 1 1 8 1 1 2 1 1 1 1 1 1 1 2 2 1 1 2 4 1 1 1 1 1 4 1 1 4 1 1 2 2 1 2 1 1 1 2 1 1 2 1 1 1 1 1 2 6 Model No. PFEL51016.4 R1117A Description Key No. Qty.
Key No. Qty. 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 37 4 8 4 8 3 1 2 2 1 4 1 1 4 1 2 1 1 1 1 6 1 1 1 2 Description Key No. Qty.
30 121 21 37 104 114 121 3 21 105 33 106 92 16 15 121 10 84 2 121 114 21 101 23 101 30 17 137 85 90 120 12 121 128 48 11 86 21 108 29 22 78 24 84 92 14 13 124 101 31 38 50 17 122 26 20 50 42 50 39 101 91 28 88 115 101 137 40 27 41 93 123 82 43 89 40 1 25 32 112 30 113 43 19 34 86 18 85 6 50 105 50 78 30 20 90 108 5 125 101 109 34 104 EXPLODED DRAWING A Model No. PFEL51016.
52 49 47 51 132 62 38 8 76 44 133 45 95 70 46 68 98 67 8 51 72 126 146 56 139 95 55 145 52 103 56 59 57 147 138 49 135 53 136 103 144 142 129 130 143 95 66 83 100 134 57 64 95 97 87 131 101 147 58 82 96 102 61 65 57 69 101 97 82 94 140 82 60 100 101 62 EXPLODED DRAWING B Model No. PFEL51016.
119 101 71 7 101 101 5 101 5 116 107 111 9 5 37 63 81 127 127 77 80 54 101 73 36 4 75 105 77 99 101 141 101 5 105 5 36 99 79 74 54 5 118 117 35 116 101 101 110 101 71 EXPLODED DRAWING C Model No. PFEL51016.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual.
