Use and Care Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each

drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the

key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it

has been preassembled. Extra parts may be included.

M10 x 80mm Screw (19)–4

M8 Locknut

(68)–10

M8 Washer

(87)–6

M8 x 38mm

Bolt (95)–4

M8 x 12mm

Screw (106)–6

M8 x 14mm

Shoulder

Screw (86)–6

M10 x 20mm

Screw (76)–6

M8 x 38mm Hex

Bolt (102)–6

M4 x 16mm

Screw (115)–6

M6 x 35mm Screw

(98)–4

M6 x 20mm

Screw (97)–4

M6 x 15mm

Screw (105)–8