Use and Care Manual

15
18
18. Attach the Seat (28) to the Seat Frame (61)
with four M6 x 20mm Screws (97) (only two are
shown); start all the Screws, and then tighten
them.
19. Make sure that all parts of the hybrid trainer are properly tightened. Extra parts may be included. To
protect the floor or carpet from damage, place a mat under the hybrid trainer.
28
61
97
17
17. Attach the Seat Frame (61) to the Seat Carriage
(32) with four M6 x 35mm Screws (98); start all
the Screws, and then tighten them.
61
98
98
32