Use and Care Manual

11
9. Insert the Pulse Wires (118) upward through the
Upright (3) as shown.
9
3
118
118
10
10. While a second person holds the Console (5)
near the Upright (3), connect the wires on the
Console to the Upper Wire Harness (48) and
to the Pulse Wires (118); make sure that the
Pulse Wire marked with an “R” is connected
to the wire on the Console marked with
an “R”.
Insert the excess wire into the Upright (3).
Tip: Avoid pinching the wires. Attach
the Console (5) to the Upright (3) with four
M4 x 16mm Round Head Screws (101).
5
118
48
101
3
Avoid pinching
the wires
11. Attach the Upright Cap (4) to the Console (5)
with two M4 x 16mm Round Head Screws (101).
11
5
4
101