Use and Care Manual

10
7. Identify the Left Upright Cover (17) and hold it
against the left side of the Upright (3).
Attach the Left Upright Cover (17) with two M4 x
16mm Round Head Screws (101).
Attach the Right Upright Cover (39) in the
same way.
7
17
39
3
101
101
8. Identify the Left and Right Handlebars (119, 120)
and orient them as shown.
Tip: Avoid pinching the Pulse Wires (118).
Attach the Left and Right Handlebars (119, 120)
to the Upright (3) with two M8 x 80mm Bolts
(116) and two M8 Jam Nuts (79).
79
118
118
120
119
116
116
8
Avoid pinching
the wires
3