User`s manual

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE TM WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE TM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
HOWTO PLUG IN THE POWER CORD
electric shock.This product is equipped with a cord
haying an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge
protector, and plug th.esurge protector into an ep-
propdate outlet that is properly Installed and
grounded In accordance with all local codes and
ordinances.
This productis for use on a nominal 120-volt circuit,
and has a grounding plugthat looks like the plug Hlus-
trated in drawing 1 below. A temporary adapter that
looks h'kethe adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pore recep-
tacle as shown in drawing 2 ifa propedy grounded out-
let is not available.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your home's power. . _ ,
Voltage surges, spikes, and noise Intederance can re.
suit from weather conditions or from other appliances
being turned on or off.
To decrease the pos-
sibility of your tread- 1
mill being damaged,
always use a surge
protector (not in-
cluded) with your
treadmill.
Surge protectors are
sold at most hardware
stores and depadment
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
This product must be
grounded. If itshould
malfunction or break
down, grounding pro-
vides a path of le_t re-
sistance for electdc cur-
rent to reduce the Ask of
The green-colored dgid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a propedy grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers ere not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
/Grounded Outlet Box
Groundi.gplug
Grounding Pin
+
Grounding
Grounded Outlet Box
Adapter
_. .Grounding Pin i
(_ , Grounding Plug
Metal Screw
Protector
7